# This Makefile is for the DBIx::Custom extension to perl. # # It was generated automatically by MakeMaker version # 6.56 (Revision: 65600) from the contents of # Makefile.PL. Don't edit this file, edit Makefile.PL instead. # # ANY CHANGES MADE HERE WILL BE LOST! # # MakeMaker ARGV: () # # MakeMaker Parameters: # ABSTRACT_FROM => q[lib/DBIx/Custom/Next.pm] # AUTHOR => q[Yuki Kimoto ] # BUILD_REQUIRES => { } # LICENSE => q[perl] # NAME => q[DBIx::Custom] # PL_FILES => { } # PREREQ_PM => { Test::More=>q[0], Object::Simple=>q[3.0621], DBD::SQLite=>q[1.25], DBI=>q[1.605] } # VERSION_FROM => q[lib/DBIx/Custom/Next.pm] # clean => { FILES=>q[DBIx-Custom-*] } # dist => { COMPRESS=>q[gzip -9f], SUFFIX=>q[gz] } # test => { TESTS=>q[t/*.t t/next/*.t] } # --- MakeMaker post_initialize section: # --- MakeMaker const_config section: # These definitions are from config.sh (via /usr/lib/perl5/5.8.8/i386-linux-thread-multi/Config.pm). # They may have been overridden via Makefile.PL or on the command line. AR = ar CC = gcc CCCDLFLAGS = -fPIC CCDLFLAGS = -Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE DLEXT = so DLSRC = dl_dlopen.xs EXE_EXT = FULL_AR = /usr/bin/ar LD = gcc LDDLFLAGS = -shared -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i386 -mtune=generic -fasynchronous-unwind-tables -L/usr/local/lib LDFLAGS = -L/usr/local/lib LIBC = /lib/libc-2.5.so LIB_EXT = .a OBJ_EXT = .o OSNAME = linux OSVERS = 2.6.18-53.el5 RANLIB = : SITELIBEXP = /usr/lib/perl5/site_perl/5.8.8 SITEARCHEXP = /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi SO = so VENDORARCHEXP = /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi VENDORLIBEXP = /usr/lib/perl5/vendor_perl/5.8.8 # --- MakeMaker constants section: AR_STATIC_ARGS = cr DIRFILESEP = / DFSEP = $(DIRFILESEP) NAME = DBIx::Custom NAME_SYM = DBIx_Custom VERSION = 0.20_01 VERSION_MACRO = VERSION VERSION_SYM = 0_20_01 DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\" XS_VERSION = 0.20_01 XS_VERSION_MACRO = XS_VERSION XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\" INST_ARCHLIB = blib/arch INST_SCRIPT = blib/script INST_BIN = blib/bin INST_LIB = blib/lib INST_MAN1DIR = blib/man1 INST_MAN3DIR = blib/man3 MAN1EXT = 1 MAN3EXT = 3pm INSTALLDIRS = site DESTDIR = PREFIX = $(SITEPREFIX) PERLPREFIX = /usr SITEPREFIX = /usr VENDORPREFIX = /usr INSTALLPRIVLIB = /usr/lib/perl5/5.8.8 DESTINSTALLPRIVLIB = $(DESTDIR)$(INSTALLPRIVLIB) INSTALLSITELIB = /usr/lib/perl5/site_perl/5.8.8 DESTINSTALLSITELIB = $(DESTDIR)$(INSTALLSITELIB) INSTALLVENDORLIB = /usr/lib/perl5/vendor_perl/5.8.8 DESTINSTALLVENDORLIB = $(DESTDIR)$(INSTALLVENDORLIB) INSTALLARCHLIB = /usr/lib/perl5/5.8.8/i386-linux-thread-multi DESTINSTALLARCHLIB = $(DESTDIR)$(INSTALLARCHLIB) INSTALLSITEARCH = /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi DESTINSTALLSITEARCH = $(DESTDIR)$(INSTALLSITEARCH) INSTALLVENDORARCH = /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi DESTINSTALLVENDORARCH = $(DESTDIR)$(INSTALLVENDORARCH) INSTALLBIN = /usr/bin DESTINSTALLBIN = $(DESTDIR)$(INSTALLBIN) INSTALLSITEBIN = /usr/bin DESTINSTALLSITEBIN = $(DESTDIR)$(INSTALLSITEBIN) INSTALLVENDORBIN = /usr/bin DESTINSTALLVENDORBIN = $(DESTDIR)$(INSTALLVENDORBIN) INSTALLSCRIPT = /usr/bin DESTINSTALLSCRIPT = $(DESTDIR)$(INSTALLSCRIPT) INSTALLSITESCRIPT = /usr/bin DESTINSTALLSITESCRIPT = $(DESTDIR)$(INSTALLSITESCRIPT) INSTALLVENDORSCRIPT = /usr/bin DESTINSTALLVENDORSCRIPT = $(DESTDIR)$(INSTALLVENDORSCRIPT) INSTALLMAN1DIR = /usr/share/man/man1 DESTINSTALLMAN1DIR = $(DESTDIR)$(INSTALLMAN1DIR) INSTALLSITEMAN1DIR = /usr/share/man/man1 DESTINSTALLSITEMAN1DIR = $(DESTDIR)$(INSTALLSITEMAN1DIR) INSTALLVENDORMAN1DIR = /usr/share/man/man1 DESTINSTALLVENDORMAN1DIR = $(DESTDIR)$(INSTALLVENDORMAN1DIR) INSTALLMAN3DIR = /usr/share/man/man3 DESTINSTALLMAN3DIR = $(DESTDIR)$(INSTALLMAN3DIR) INSTALLSITEMAN3DIR = /usr/share/man/man3 DESTINSTALLSITEMAN3DIR = $(DESTDIR)$(INSTALLSITEMAN3DIR) INSTALLVENDORMAN3DIR = /usr/share/man/man3 DESTINSTALLVENDORMAN3DIR = $(DESTDIR)$(INSTALLVENDORMAN3DIR) PERL_LIB = /usr/lib/perl5/5.8.8 PERL_ARCHLIB = /usr/lib/perl5/5.8.8/i386-linux-thread-multi LIBPERL_A = libperl.a FIRST_MAKEFILE = Makefile MAKEFILE_OLD = Makefile.old MAKE_APERL_FILE = Makefile.aperl PERLMAINCC = $(CC) PERL_INC = /usr/lib/perl5/5.8.8/i386-linux-thread-multi/CORE PERL = /usr/bin/perl FULLPERL = /usr/bin/perl ABSPERL = $(PERL) PERLRUN = $(PERL) FULLPERLRUN = $(FULLPERL) ABSPERLRUN = $(ABSPERL) PERLRUNINST = $(PERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" FULLPERLRUNINST = $(FULLPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" ABSPERLRUNINST = $(ABSPERLRUN) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" PERL_CORE = 0 PERM_DIR = 755 PERM_RW = 644 PERM_RWX = 755 MAKEMAKER = /home/kimoto/perl5/lib/perl5/ExtUtils/MakeMaker.pm MM_VERSION = 6.56 MM_REVISION = 65600 # FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle). # BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle) # PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar) # DLBASE = Basename part of dynamic library. May be just equal BASEEXT. MAKE = make FULLEXT = DBIx/Custom BASEEXT = Custom PARENT_NAME = DBIx DLBASE = $(BASEEXT) VERSION_FROM = lib/DBIx/Custom/Next.pm OBJECT = LDFROM = $(OBJECT) LINKTYPE = dynamic BOOTDEP = # Handy lists of source code files: XS_FILES = C_FILES = O_FILES = H_FILES = MAN1PODS = MAN3PODS = lib/DBIx/Custom/Next.pm \ lib/DBIx/Custom/Next/Mapper.pm \ lib/DBIx/Custom/Next/Model.pm \ lib/DBIx/Custom/Next/NotExists.pm \ lib/DBIx/Custom/Next/Order.pm \ lib/DBIx/Custom/Next/Result.pm \ lib/DBIx/Custom/Next/Util.pm \ lib/DBIx/Custom/Next/Where.pm # Where is the Config information that we are using/depend on CONFIGDEP = $(PERL_ARCHLIB)$(DFSEP)Config.pm $(PERL_INC)$(DFSEP)config.h # Where to build things INST_LIBDIR = $(INST_LIB)/DBIx INST_ARCHLIBDIR = $(INST_ARCHLIB)/DBIx INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT) INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT) INST_STATIC = INST_DYNAMIC = INST_BOOT = # Extra linker info EXPORT_LIST = PERL_ARCHIVE = PERL_ARCHIVE_AFTER = TO_INST_PM = lib/DBIx/Custom/Next.pm \ lib/DBIx/Custom/Next/Mapper.pm \ lib/DBIx/Custom/Next/Model.pm \ lib/DBIx/Custom/Next/NotExists.pm \ lib/DBIx/Custom/Next/Order.pm \ lib/DBIx/Custom/Next/Result.pm \ lib/DBIx/Custom/Next/Util.pm \ lib/DBIx/Custom/Next/Where.pm \ next.pl PM_TO_BLIB = lib/DBIx/Custom/Next/Util.pm \ blib/lib/DBIx/Custom/Next/Util.pm \ lib/DBIx/Custom/Next/Model.pm \ blib/lib/DBIx/Custom/Next/Model.pm \ lib/DBIx/Custom/Next/Order.pm \ blib/lib/DBIx/Custom/Next/Order.pm \ lib/DBIx/Custom/Next/NotExists.pm \ blib/lib/DBIx/Custom/Next/NotExists.pm \ lib/DBIx/Custom/Next/Mapper.pm \ blib/lib/DBIx/Custom/Next/Mapper.pm \ lib/DBIx/Custom/Next/Where.pm \ blib/lib/DBIx/Custom/Next/Where.pm \ lib/DBIx/Custom/Next.pm \ blib/lib/DBIx/Custom/Next.pm \ next.pl \ $(INST_LIB)/DBIx/next.pl \ lib/DBIx/Custom/Next/Result.pm \ blib/lib/DBIx/Custom/Next/Result.pm # --- MakeMaker platform_constants section: MM_Unix_VERSION = 6.56 PERL_MALLOC_DEF = -DPERL_EXTMALLOC_DEF -Dmalloc=Perl_malloc -Dfree=Perl_mfree -Drealloc=Perl_realloc -Dcalloc=Perl_calloc # --- MakeMaker tool_autosplit section: # Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto AUTOSPLITFILE = $(ABSPERLRUN) -e 'use AutoSplit; autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1)' -- # --- MakeMaker tool_xsubpp section: # --- MakeMaker tools_other section: SHELL = /bin/sh CHMOD = chmod CP = cp MV = mv NOOP = $(TRUE) NOECHO = @ RM_F = rm -f RM_RF = rm -rf TEST_F = test -f TOUCH = touch UMASK_NULL = umask 0 DEV_NULL = > /dev/null 2>&1 MKPATH = $(ABSPERLRUN) -MExtUtils::Command -e 'mkpath' -- EQUALIZE_TIMESTAMP = $(ABSPERLRUN) -MExtUtils::Command -e 'eqtime' -- FALSE = false TRUE = true ECHO = echo ECHO_N = echo -n UNINST = 0 VERBINST = 0 MOD_INSTALL = $(ABSPERLRUN) -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''$(VERBINST)'\'', uninstall_shadows => '\''$(UNINST)'\'', dir_mode => '\''$(PERM_DIR)'\'' ]);' -- DOC_INSTALL = $(ABSPERLRUN) -MExtUtils::Command::MM -e 'perllocal_install' -- UNINSTALL = $(ABSPERLRUN) -MExtUtils::Command::MM -e 'uninstall' -- WARN_IF_OLD_PACKLIST = $(ABSPERLRUN) -MExtUtils::Command::MM -e 'warn_if_old_packlist' -- MACROSTART = MACROEND = USEMAKEFILE = -f FIXIN = $(ABSPERLRUN) -MExtUtils::MY -e 'MY->fixin(shift)' -- # --- MakeMaker makemakerdflt section: makemakerdflt : all $(NOECHO) $(NOOP) # --- MakeMaker dist section: TAR = tar TARFLAGS = cvf ZIP = zip ZIPFLAGS = -r COMPRESS = gzip -9f SUFFIX = gz SHAR = shar PREOP = $(NOECHO) $(NOOP) POSTOP = $(NOECHO) $(NOOP) TO_UNIX = $(NOECHO) $(NOOP) CI = ci -u RCS_LABEL = rcs -Nv$(VERSION_SYM): -q DIST_CP = best DIST_DEFAULT = tardist DISTNAME = DBIx-Custom DISTVNAME = DBIx-Custom-0.20_01 # --- MakeMaker macro section: # --- MakeMaker depend section: # --- MakeMaker cflags section: # --- MakeMaker const_loadlibs section: # --- MakeMaker const_cccmd section: # --- MakeMaker post_constants section: # --- MakeMaker pasthru section: PASTHRU = LIBPERL_A="$(LIBPERL_A)"\ LINKTYPE="$(LINKTYPE)"\ PREFIX="$(PREFIX)" # --- MakeMaker special_targets section: .SUFFIXES : .xs .c .C .cpp .i .s .cxx .cc $(OBJ_EXT) .PHONY: all config static dynamic test linkext manifest blibdirs clean realclean disttest distdir # --- MakeMaker c_o section: # --- MakeMaker xs_c section: # --- MakeMaker xs_o section: # --- MakeMaker top_targets section: all :: pure_all manifypods $(NOECHO) $(NOOP) pure_all :: config pm_to_blib subdirs linkext $(NOECHO) $(NOOP) subdirs :: $(MYEXTLIB) $(NOECHO) $(NOOP) config :: $(FIRST_MAKEFILE) blibdirs $(NOECHO) $(NOOP) help : perldoc ExtUtils::MakeMaker # --- MakeMaker blibdirs section: blibdirs : $(INST_LIBDIR)$(DFSEP).exists $(INST_ARCHLIB)$(DFSEP).exists $(INST_AUTODIR)$(DFSEP).exists $(INST_ARCHAUTODIR)$(DFSEP).exists $(INST_BIN)$(DFSEP).exists $(INST_SCRIPT)$(DFSEP).exists $(INST_MAN1DIR)$(DFSEP).exists $(INST_MAN3DIR)$(DFSEP).exists $(NOECHO) $(NOOP) # Backwards compat with 6.18 through 6.25 blibdirs.ts : blibdirs $(NOECHO) $(NOOP) $(INST_LIBDIR)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_LIBDIR) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_LIBDIR) $(NOECHO) $(TOUCH) $(INST_LIBDIR)$(DFSEP).exists $(INST_ARCHLIB)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_ARCHLIB) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_ARCHLIB) $(NOECHO) $(TOUCH) $(INST_ARCHLIB)$(DFSEP).exists $(INST_AUTODIR)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_AUTODIR) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_AUTODIR) $(NOECHO) $(TOUCH) $(INST_AUTODIR)$(DFSEP).exists $(INST_ARCHAUTODIR)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_ARCHAUTODIR) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_ARCHAUTODIR) $(NOECHO) $(TOUCH) $(INST_ARCHAUTODIR)$(DFSEP).exists $(INST_BIN)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_BIN) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_BIN) $(NOECHO) $(TOUCH) $(INST_BIN)$(DFSEP).exists $(INST_SCRIPT)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_SCRIPT) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_SCRIPT) $(NOECHO) $(TOUCH) $(INST_SCRIPT)$(DFSEP).exists $(INST_MAN1DIR)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_MAN1DIR) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_MAN1DIR) $(NOECHO) $(TOUCH) $(INST_MAN1DIR)$(DFSEP).exists $(INST_MAN3DIR)$(DFSEP).exists :: Makefile.PL $(NOECHO) $(MKPATH) $(INST_MAN3DIR) $(NOECHO) $(CHMOD) $(PERM_DIR) $(INST_MAN3DIR) $(NOECHO) $(TOUCH) $(INST_MAN3DIR)$(DFSEP).exists # --- MakeMaker linkext section: linkext :: $(LINKTYPE) $(NOECHO) $(NOOP) # --- MakeMaker dlsyms section: # --- MakeMaker dynamic section: dynamic :: $(FIRST_MAKEFILE) $(INST_DYNAMIC) $(INST_BOOT) $(NOECHO) $(NOOP) # --- MakeMaker dynamic_bs section: BOOTSTRAP = # --- MakeMaker dynamic_lib section: # --- MakeMaker static section: ## $(INST_PM) has been moved to the all: target. ## It remains here for awhile to allow for old usage: "make static" static :: $(FIRST_MAKEFILE) $(INST_STATIC) $(NOECHO) $(NOOP) # --- MakeMaker static_lib section: # --- MakeMaker manifypods section: POD2MAN_EXE = $(PERLRUN) "-MExtUtils::Command::MM" -e pod2man "--" POD2MAN = $(POD2MAN_EXE) manifypods : pure_all \ lib/DBIx/Custom/Next/Util.pm \ lib/DBIx/Custom/Next/Model.pm \ lib/DBIx/Custom/Next/Order.pm \ lib/DBIx/Custom/Next/NotExists.pm \ lib/DBIx/Custom/Next/Mapper.pm \ lib/DBIx/Custom/Next/Where.pm \ lib/DBIx/Custom/Next.pm \ lib/DBIx/Custom/Next/Result.pm $(NOECHO) $(POD2MAN) --section=3 --perm_rw=$(PERM_RW) \ lib/DBIx/Custom/Next/Util.pm $(INST_MAN3DIR)/DBIx::Custom::Next::Util.$(MAN3EXT) \ lib/DBIx/Custom/Next/Model.pm $(INST_MAN3DIR)/DBIx::Custom::Next::Model.$(MAN3EXT) \ lib/DBIx/Custom/Next/Order.pm $(INST_MAN3DIR)/DBIx::Custom::Next::Order.$(MAN3EXT) \ lib/DBIx/Custom/Next/NotExists.pm $(INST_MAN3DIR)/DBIx::Custom::Next::NotExists.$(MAN3EXT) \ lib/DBIx/Custom/Next/Mapper.pm $(INST_MAN3DIR)/DBIx::Custom::Next::Mapper.$(MAN3EXT) \ lib/DBIx/Custom/Next/Where.pm $(INST_MAN3DIR)/DBIx::Custom::Next::Where.$(MAN3EXT) \ lib/DBIx/Custom/Next.pm $(INST_MAN3DIR)/DBIx::Custom::Next.$(MAN3EXT) \ lib/DBIx/Custom/Next/Result.pm $(INST_MAN3DIR)/DBIx::Custom::Next::Result.$(MAN3EXT) # --- MakeMaker processPL section: # --- MakeMaker installbin section: # --- MakeMaker subdirs section: # none # --- MakeMaker clean_subdirs section: clean_subdirs : $(NOECHO) $(NOOP) # --- MakeMaker clean section: # Delete temporary files but do not touch installed files. We don't delete # the Makefile here so a later make realclean still has a makefile to use. clean :: clean_subdirs - $(RM_F) \ *$(LIB_EXT) core \ core.[0-9] $(INST_ARCHAUTODIR)/extralibs.all \ core.[0-9][0-9] $(BASEEXT).bso \ pm_to_blib.ts core.[0-9][0-9][0-9][0-9] \ $(BASEEXT).x $(BOOTSTRAP) \ perl$(EXE_EXT) tmon.out \ *$(OBJ_EXT) pm_to_blib \ $(INST_ARCHAUTODIR)/extralibs.ld blibdirs.ts \ core.[0-9][0-9][0-9][0-9][0-9] *perl.core \ core.*perl.*.? $(MAKE_APERL_FILE) \ perl $(BASEEXT).def \ core.[0-9][0-9][0-9] mon.out \ lib$(BASEEXT).def perlmain.c \ perl.exe so_locations \ $(BASEEXT).exp - $(RM_RF) \ DBIx-Custom-* blib - $(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) $(DEV_NULL) # --- MakeMaker realclean_subdirs section: realclean_subdirs : $(NOECHO) $(NOOP) # --- MakeMaker realclean section: # Delete temporary files (via clean) and also delete dist files realclean purge :: clean realclean_subdirs - $(RM_F) \ $(MAKEFILE_OLD) $(FIRST_MAKEFILE) - $(RM_RF) \ $(DISTVNAME) # --- MakeMaker metafile section: metafile : create_distdir $(NOECHO) $(ECHO) Generating META.yml $(NOECHO) $(ECHO) '--- #YAML:1.0' > META_new.yml $(NOECHO) $(ECHO) 'name: DBIx-Custom' >> META_new.yml $(NOECHO) $(ECHO) 'version: 0.20_01' >> META_new.yml $(NOECHO) $(ECHO) 'abstract: ~' >> META_new.yml $(NOECHO) $(ECHO) 'author:' >> META_new.yml $(NOECHO) $(ECHO) ' - Yuki Kimoto ' >> META_new.yml $(NOECHO) $(ECHO) 'license: perl' >> META_new.yml $(NOECHO) $(ECHO) 'distribution_type: module' >> META_new.yml $(NOECHO) $(ECHO) 'configure_requires:' >> META_new.yml $(NOECHO) $(ECHO) ' ExtUtils::MakeMaker: 0' >> META_new.yml $(NOECHO) $(ECHO) 'build_requires:' >> META_new.yml $(NOECHO) $(ECHO) ' ExtUtils::MakeMaker: 0' >> META_new.yml $(NOECHO) $(ECHO) 'requires:' >> META_new.yml $(NOECHO) $(ECHO) ' DBD::SQLite: 1.25' >> META_new.yml $(NOECHO) $(ECHO) ' DBI: 1.605' >> META_new.yml $(NOECHO) $(ECHO) ' Object::Simple: 3.0621' >> META_new.yml $(NOECHO) $(ECHO) ' Test::More: 0' >> META_new.yml $(NOECHO) $(ECHO) 'no_index:' >> META_new.yml $(NOECHO) $(ECHO) ' directory:' >> META_new.yml $(NOECHO) $(ECHO) ' - t' >> META_new.yml $(NOECHO) $(ECHO) ' - inc' >> META_new.yml $(NOECHO) $(ECHO) 'generated_by: ExtUtils::MakeMaker version 6.56' >> META_new.yml $(NOECHO) $(ECHO) 'meta-spec:' >> META_new.yml $(NOECHO) $(ECHO) ' url: http://module-build.sourceforge.net/META-spec-v1.4.html' >> META_new.yml $(NOECHO) $(ECHO) ' version: 1.4' >> META_new.yml -$(NOECHO) $(MV) META_new.yml $(DISTVNAME)/META.yml # --- MakeMaker signature section: signature : cpansign -s # --- MakeMaker dist_basics section: distclean :: realclean distcheck $(NOECHO) $(NOOP) distcheck : $(PERLRUN) "-MExtUtils::Manifest=fullcheck" -e fullcheck skipcheck : $(PERLRUN) "-MExtUtils::Manifest=skipcheck" -e skipcheck manifest : $(PERLRUN) "-MExtUtils::Manifest=mkmanifest" -e mkmanifest veryclean : realclean $(RM_F) *~ */*~ *.orig */*.orig *.bak */*.bak *.old */*.old # --- MakeMaker dist_core section: dist : $(DIST_DEFAULT) $(FIRST_MAKEFILE) $(NOECHO) $(ABSPERLRUN) -l -e 'print '\''Warning: Makefile possibly out of date with $(VERSION_FROM)'\''' \ -e ' if -e '\''$(VERSION_FROM)'\'' and -M '\''$(VERSION_FROM)'\'' < -M '\''$(FIRST_MAKEFILE)'\'';' -- tardist : $(DISTVNAME).tar$(SUFFIX) $(NOECHO) $(NOOP) uutardist : $(DISTVNAME).tar$(SUFFIX) uuencode $(DISTVNAME).tar$(SUFFIX) $(DISTVNAME).tar$(SUFFIX) > $(DISTVNAME).tar$(SUFFIX)_uu $(DISTVNAME).tar$(SUFFIX) : distdir $(PREOP) $(TO_UNIX) $(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME) $(RM_RF) $(DISTVNAME) $(COMPRESS) $(DISTVNAME).tar $(POSTOP) zipdist : $(DISTVNAME).zip $(NOECHO) $(NOOP) $(DISTVNAME).zip : distdir $(PREOP) $(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME) $(RM_RF) $(DISTVNAME) $(POSTOP) shdist : distdir $(PREOP) $(SHAR) $(DISTVNAME) > $(DISTVNAME).shar $(RM_RF) $(DISTVNAME) $(POSTOP) # --- MakeMaker distdir section: create_distdir : $(RM_RF) $(DISTVNAME) $(PERLRUN) "-MExtUtils::Manifest=manicopy,maniread" \ -e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');" distdir : create_distdir distmeta $(NOECHO) $(NOOP) # --- MakeMaker dist_test section: disttest : distdir cd $(DISTVNAME) && $(ABSPERLRUN) Makefile.PL cd $(DISTVNAME) && $(MAKE) $(PASTHRU) cd $(DISTVNAME) && $(MAKE) test $(PASTHRU) # --- MakeMaker dist_ci section: ci : $(PERLRUN) "-MExtUtils::Manifest=maniread" \ -e "@all = keys %{ maniread() };" \ -e "print(qq{Executing $(CI) @all\n}); system(qq{$(CI) @all});" \ -e "print(qq{Executing $(RCS_LABEL) ...\n}); system(qq{$(RCS_LABEL) @all});" # --- MakeMaker distmeta section: distmeta : create_distdir metafile $(NOECHO) cd $(DISTVNAME) && $(ABSPERLRUN) -MExtUtils::Manifest=maniadd -e 'eval { maniadd({q{META.yml} => q{Module meta-data (added by MakeMaker)}}) } ' \ -e ' or print "Could not add META.yml to MANIFEST: $${'\''@'\''}\n"' -- # --- MakeMaker distsignature section: distsignature : create_distdir $(NOECHO) cd $(DISTVNAME) && $(ABSPERLRUN) -MExtUtils::Manifest=maniadd -e 'eval { maniadd({q{SIGNATURE} => q{Public-key signature (added by MakeMaker)}}) } ' \ -e ' or print "Could not add SIGNATURE to MANIFEST: $${'\''@'\''}\n"' -- $(NOECHO) cd $(DISTVNAME) && $(TOUCH) SIGNATURE cd $(DISTVNAME) && cpansign -s # --- MakeMaker install section: install :: pure_install doc_install $(NOECHO) $(NOOP) install_perl :: pure_perl_install doc_perl_install $(NOECHO) $(NOOP) install_site :: pure_site_install doc_site_install $(NOECHO) $(NOOP) install_vendor :: pure_vendor_install doc_vendor_install $(NOECHO) $(NOOP) pure_install :: pure_$(INSTALLDIRS)_install $(NOECHO) $(NOOP) doc_install :: doc_$(INSTALLDIRS)_install $(NOECHO) $(NOOP) pure__install : pure_site_install $(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site doc__install : doc_site_install $(NOECHO) $(ECHO) INSTALLDIRS not defined, defaulting to INSTALLDIRS=site pure_perl_install :: all $(NOECHO) $(MOD_INSTALL) \ read $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist \ write $(DESTINSTALLARCHLIB)/auto/$(FULLEXT)/.packlist \ $(INST_LIB) $(DESTINSTALLPRIVLIB) \ $(INST_ARCHLIB) $(DESTINSTALLARCHLIB) \ $(INST_BIN) $(DESTINSTALLBIN) \ $(INST_SCRIPT) $(DESTINSTALLSCRIPT) \ $(INST_MAN1DIR) $(DESTINSTALLMAN1DIR) \ $(INST_MAN3DIR) $(DESTINSTALLMAN3DIR) $(NOECHO) $(WARN_IF_OLD_PACKLIST) \ $(SITEARCHEXP)/auto/$(FULLEXT) pure_site_install :: all $(NOECHO) $(MOD_INSTALL) \ read $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist \ write $(DESTINSTALLSITEARCH)/auto/$(FULLEXT)/.packlist \ $(INST_LIB) $(DESTINSTALLSITELIB) \ $(INST_ARCHLIB) $(DESTINSTALLSITEARCH) \ $(INST_BIN) $(DESTINSTALLSITEBIN) \ $(INST_SCRIPT) $(DESTINSTALLSITESCRIPT) \ $(INST_MAN1DIR) $(DESTINSTALLSITEMAN1DIR) \ $(INST_MAN3DIR) $(DESTINSTALLSITEMAN3DIR) $(NOECHO) $(WARN_IF_OLD_PACKLIST) \ $(PERL_ARCHLIB)/auto/$(FULLEXT) pure_vendor_install :: all $(NOECHO) $(MOD_INSTALL) \ read $(VENDORARCHEXP)/auto/$(FULLEXT)/.packlist \ write $(DESTINSTALLVENDORARCH)/auto/$(FULLEXT)/.packlist \ $(INST_LIB) $(DESTINSTALLVENDORLIB) \ $(INST_ARCHLIB) $(DESTINSTALLVENDORARCH) \ $(INST_BIN) $(DESTINSTALLVENDORBIN) \ $(INST_SCRIPT) $(DESTINSTALLVENDORSCRIPT) \ $(INST_MAN1DIR) $(DESTINSTALLVENDORMAN1DIR) \ $(INST_MAN3DIR) $(DESTINSTALLVENDORMAN3DIR) doc_perl_install :: all $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB) -$(NOECHO) $(DOC_INSTALL) \ "Module" "$(NAME)" \ "installed into" "$(INSTALLPRIVLIB)" \ LINKTYPE "$(LINKTYPE)" \ VERSION "$(VERSION)" \ EXE_FILES "$(EXE_FILES)" \ >> $(DESTINSTALLARCHLIB)/perllocal.pod doc_site_install :: all $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB) -$(NOECHO) $(DOC_INSTALL) \ "Module" "$(NAME)" \ "installed into" "$(INSTALLSITELIB)" \ LINKTYPE "$(LINKTYPE)" \ VERSION "$(VERSION)" \ EXE_FILES "$(EXE_FILES)" \ >> $(DESTINSTALLARCHLIB)/perllocal.pod doc_vendor_install :: all $(NOECHO) $(ECHO) Appending installation info to $(DESTINSTALLARCHLIB)/perllocal.pod -$(NOECHO) $(MKPATH) $(DESTINSTALLARCHLIB) -$(NOECHO) $(DOC_INSTALL) \ "Module" "$(NAME)" \ "installed into" "$(INSTALLVENDORLIB)" \ LINKTYPE "$(LINKTYPE)" \ VERSION "$(VERSION)" \ EXE_FILES "$(EXE_FILES)" \ >> $(DESTINSTALLARCHLIB)/perllocal.pod uninstall :: uninstall_from_$(INSTALLDIRS)dirs $(NOECHO) $(NOOP) uninstall_from_perldirs :: $(NOECHO) $(UNINSTALL) $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist uninstall_from_sitedirs :: $(NOECHO) $(UNINSTALL) $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist uninstall_from_vendordirs :: $(NOECHO) $(UNINSTALL) $(VENDORARCHEXP)/auto/$(FULLEXT)/.packlist # --- MakeMaker force section: # Phony target to force checking subdirectories. FORCE : $(NOECHO) $(NOOP) # --- MakeMaker perldepend section: # --- MakeMaker makefile section: # We take a very conservative approach here, but it's worth it. # We move Makefile to Makefile.old here to avoid gnu make looping. $(FIRST_MAKEFILE) : Makefile.PL $(CONFIGDEP) $(NOECHO) $(ECHO) "Makefile out-of-date with respect to $?" $(NOECHO) $(ECHO) "Cleaning current config before rebuilding Makefile..." -$(NOECHO) $(RM_F) $(MAKEFILE_OLD) -$(NOECHO) $(MV) $(FIRST_MAKEFILE) $(MAKEFILE_OLD) - $(MAKE) $(USEMAKEFILE) $(MAKEFILE_OLD) clean $(DEV_NULL) $(PERLRUN) Makefile.PL $(NOECHO) $(ECHO) "==> Your Makefile has been rebuilt. <==" $(NOECHO) $(ECHO) "==> Please rerun the $(MAKE) command. <==" $(FALSE) # --- MakeMaker staticmake section: # --- MakeMaker makeaperl section --- MAP_TARGET = perl FULLPERL = /usr/bin/perl $(MAP_TARGET) :: static $(MAKE_APERL_FILE) $(MAKE) $(USEMAKEFILE) $(MAKE_APERL_FILE) $@ $(MAKE_APERL_FILE) : $(FIRST_MAKEFILE) pm_to_blib $(NOECHO) $(ECHO) Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET) $(NOECHO) $(PERLRUNINST) \ Makefile.PL DIR= \ MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \ MAKEAPERL=1 NORECURS=1 CCCDLFLAGS= # --- MakeMaker test section: TEST_VERBOSE=0 TEST_TYPE=test_$(LINKTYPE) TEST_FILE = test.pl TEST_FILES = t/*.t t/next/*.t TESTDB_SW = -d testdb :: testdb_$(LINKTYPE) test :: $(TEST_TYPE) subdirs-test subdirs-test :: $(NOECHO) $(NOOP) test_dynamic :: pure_all PERL_DL_NONLAZY=1 $(FULLPERLRUN) "-MExtUtils::Command::MM" "-e" "test_harness($(TEST_VERBOSE), '$(INST_LIB)', '$(INST_ARCHLIB)')" $(TEST_FILES) testdb_dynamic :: pure_all PERL_DL_NONLAZY=1 $(FULLPERLRUN) $(TESTDB_SW) "-I$(INST_LIB)" "-I$(INST_ARCHLIB)" $(TEST_FILE) test_ : test_dynamic test_static :: test_dynamic testdb_static :: testdb_dynamic # --- MakeMaker ppd section: # Creates a PPD (Perl Package Description) for a binary distribution. ppd : $(NOECHO) $(ECHO) '' > $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' Yuki Kimoto <kimoto.yuki@gmail.com>' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) ' ' >> $(DISTNAME).ppd $(NOECHO) $(ECHO) '' >> $(DISTNAME).ppd # --- MakeMaker pm_to_blib section: pm_to_blib : $(FIRST_MAKEFILE) $(TO_INST_PM) $(NOECHO) $(ABSPERLRUN) -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''$(INST_LIB)/auto'\'', q[$(PM_FILTER)], '\''$(PERM_DIR)'\'')' -- \ lib/DBIx/Custom/Next/Util.pm blib/lib/DBIx/Custom/Next/Util.pm \ lib/DBIx/Custom/Next/Model.pm blib/lib/DBIx/Custom/Next/Model.pm \ lib/DBIx/Custom/Next/Order.pm blib/lib/DBIx/Custom/Next/Order.pm \ lib/DBIx/Custom/Next/NotExists.pm blib/lib/DBIx/Custom/Next/NotExists.pm \ lib/DBIx/Custom/Next/Mapper.pm blib/lib/DBIx/Custom/Next/Mapper.pm \ lib/DBIx/Custom/Next/Where.pm blib/lib/DBIx/Custom/Next/Where.pm \ lib/DBIx/Custom/Next.pm blib/lib/DBIx/Custom/Next.pm \ next.pl $(INST_LIB)/DBIx/next.pl \ lib/DBIx/Custom/Next/Result.pm blib/lib/DBIx/Custom/Next/Result.pm $(NOECHO) $(TOUCH) pm_to_blib # --- MakeMaker selfdocument section: # --- MakeMaker postamble section: # End.